RESIDENTIAL Reverse Osmosis(RO) MembraneRO(Reverse Osmosis) Elements for Residential use (1.8 inch diameter)Model No: RE-1812-50, Capacity: 50 GPD
Water is one of the most essential elements for sustaining human life. However, we face health risks from exposure to microbial & various contaminants that may be present in the water we drink. With the use of CSM’s Residential RO(Reverse Osmosis) Membranes, 100% of viruses and over 99% of chemical substances are removed meaning we can enjoy clean, great tasting and most importantly safe water at home.
Specification:Membrane Type: Thin-Film CompositeMembrane Materials: Polyamide (PA)Elements Configuration: Spiral-Wound, Tap Wrapping Applied Pressure: 50 PSI (3.4 Bars)Flow Rate: 50 GPD (7.9 LPH)Stabilized Salt Rejection: 98%
The stated product performance is based on data taken after 30 minutes of operation at the following test conditions:
• 200 mg/L NaCl solution at 60 psi (0.41 MPa) applied pressure
• 15% recovery
• 77 oF (25 oC)
• pH 6.5–7.0
Dry type elements are vacuum leak tested using the San Diego Protocol.Permeate flow rate for each element may vary but will be no more than 15%.Dry elements are packaged in a polyethylene bag ¤ Wet elements are packaged in a polyethylene bag containing SB(4g/L) + HCl(0.51g/L) solution.
Operating Limits:Maximum Operating Temperature: 113° F (45°C)Maximum Operating Pressure: 125 psig (0.86 Mpa)Maximum Feed Flow Rate: 2.0 gpm (7.6 lpm)Maximum Turbidity: 1.0 NTUpH Range, Continuous Operational: 2 – 11Maximum Feed Silt Density Index (SDI): 5Free Chlorine Concentration : < 0.1 mg/L
The information provided in this document is solely for informative purposes. It is the user’s responsibility to ensure the appropriate usage of this product. Woongjin Chemical assumes no obligation, liability or damages incurred for the misuse of the product or for the information provided in this document. This document does not express or implies any warranty as to the merchantability or fitness of the products.
No comments:
Post a Comment